November 19, 2026 · Edition 02Occupational & Environmental Medicine
This Month at St. George’s
Ready for Winter. Prepared for What Comes Next.
Four practical priorities for Pasadena-area workplaces: storm readiness, first-aid planning, silica exposure, and respiratory illness prevention. Choose the actions that fit your team, assign a point person, and set a completion date.
St. George’s Medical Clinic · Pasadena, California · Sources checked November 19, 2026 · 5-minute read
Winter Readiness
Prepare Before the Forecast Becomes a Disruption.
Take-Home Message
Assign one person to check weather and access conditions, then confirm how each shift will receive instructions.
On November 13, California’s Department of Industrial Relations urged workplaces to prepare for winter storms and potential El Niño impacts. Rain, wind, flooding, debris flows, and power interruptions can change conditions quickly, including at sites that usually operate indoors.
Employer Actions
Walk entrances, loading areas, outdoor work zones, and emergency routes before the next storm; assign corrections and a completion date.
Refresh emergency contacts and the plan for schedule changes, closures, and cleanup. Give cleanup tasks only to appropriately trained and equipped staff.
Employee Actions
Know where to find shift updates and which routes remain available if normal access is interrupted.
Check current travel conditions and follow emergency instructions. Stay clear of downed power lines and unstable areas.
Check kit contents, access, and ownership now, while monitoring the final status of California’s first-aid rule changes.
Cal/OSHA’s October presentation describes Board-adopted updates for construction and general industry, including clearer kit-content and placement expectations. It anticipates January 1, 2027, subject to further approval and filing. As of November 19, the official rulemaking page does not list an effective date. Treat that date as provisional and continue meeting current requirements.
Employer Actions
Inventory kits by work area and shift; replace used or unusable supplies and confirm that employees can reach them.
Review supply needs with your consulting clinician and safety lead, including hazards that may call for specialized items. Check the official rulemaking page before setting a compliance deadline.
Employee Actions
Locate the nearest kit and learn who is trained to provide first aid on your shift.
Tell the designated supply contact when materials are used or missing so the kit remains ready.
Connect Silica Controls With Medical Surveillance.
Take-Home Message
For operations involving silica, review the actual tasks and exposures before deciding which employees need medical surveillance.
Cal/OSHA published a new general-industry silica guide this month, with practical information on dust controls, training, and medical surveillance under Section 5204. This is updated guidance, not a blanket new examination requirement. Applicability depends on the work performed and exposure criteria; construction operations have separate provisions.
Employer Actions
Have your safety lead compare cutting, grinding, and polishing tasks with the applicable silica standard. Review wet methods, ventilation, housekeeping, and training records.
For employees who meet surveillance criteria, provide the evaluating clinician with job tasks, exposure information, respirator use, and previous testing dates. Keep a due-date list.
Employee Actions
Use the specified dust controls and protective equipment each time; avoid dry sweeping or compressed-air cleanup where prohibited.
At your surveillance visit, describe the materials and tasks you work with and bring any requested prior records. Medical checks complement exposure controls; they do not replace them.
Pair vaccination planning with cleaner air, clear illness procedures, and a practical staffing plan.
NIOSH’s workplace guidance emphasizes ventilation, routine cleaning, flu-vaccination access, and policies that support staying home when ill. These are established prevention measures to put into practice before holiday gatherings and winter staffing pressures, rather than a newly announced requirement.
Employer Actions
Ask your facilities contact to review ventilation and filtration maintenance, and keep routine cleaning supplies available.
Reconfirm illness and coverage procedures with supervisors. Make vaccination access easy to understand and use guidance appropriate to your workplace, especially in healthcare settings.
Employee Actions
Review recommended seasonal vaccinations with your clinician, taking your health history into account.
Know your workplace’s illness procedures before you need them, and follow the prevention measures appropriate to your role.
Bring your job roles, relevant exposures, and upcoming medical-surveillance dates to our team. We can help coordinate the clinical portion of your workplace program and clarify what is needed before each evaluation.
Choose one priority from this edition that applies to your workforce.
Identify the employees, tasks, and existing records involved.
Connect your designated employer contact with SGMC to plan the next step.
General education, not an individual medical assessment or a complete compliance review. Requirements depend on your workplace and may change. Use current official guidance and medical advice appropriate to your circumstances.
October 2026 · Edition 01Occupational & Environmental Medicine
This month at St. George’s
A Season for Preparation.
Five timely topics for California workplaces. Start with each take-home message, then use the short employer and employee action lists to turn the guidance into a date, an assigned responsibility, or a practical change.
St. George’s Medical Clinic · Pasadena, California · 6-minute read
Seasonal planning
Put Flu Prevention on the Calendar.
Take-Home Message
Choose a vaccination date, then make it easy for your team to attend.
CDC recommends a flu vaccine each season, with rare exceptions, ideally by the end of October. Vaccination can still help later while flu is circulating. Pair vaccination access with cleaner air and everyday hygiene.
Employer Actions
Choose a coordinator and an on-site vaccination date, or share nearby vaccination options and appointment information.
Check ventilation and hand-hygiene supplies in shared spaces; make sure the team knows your illness-related attendance procedures.
Employee Actions
Check whether you have received this season’s flu vaccine. If due, book an appointment and discuss individual considerations with your clinician.
Wash your hands and cover coughs. If you become ill, limit contact with others and follow the applicable stay-home and return-to-work guidance.
Know who needs surveillance, when the next test is due, and who will arrange follow-up.
California’s revised lead standards include medical-surveillance requirements and additional general-industry medical-removal criteria effective January 1, 2026. The practical priority is to connect covered job tasks with the right testing and physician follow-up schedule.
Employer Actions
Create or update a roster of covered roles and enrolled employees, with last-test and next-due dates. Confirm the schedule with your occupational medicine clinician.
Name the person who arranges appointments and confirms completion. Review exposure controls and any required follow-up with your safety and medical teams.
Employee Actions
Confirm your next scheduled blood lead test. Ask your clinician to explain your result and give you a clear follow-up date.
Follow your assigned protective-equipment and hygiene procedures, including washing exposed hands and face before meals and keeping food out of lead-exposure work areas.
Assign an air-quality monitor and agree on work changes before a smoke event.
California’s wildfire-smoke standard generally applies at a current PM2.5 Air Quality Index of 151 or higher when exposure is reasonably anticipated, subject to exceptions. Covered employers check conditions at the start of the shift and periodically as needed.
Employer Actions
Name a person and a backup to check current PM2.5 AQI at shift start and as conditions change. Record how updates reach the team.
Identify filtered work areas or practical schedule/location changes. Confirm that appropriate NIOSH-approved respirators and required training are ready under your smoke plan.
Employee Actions
Before outdoor tasks, know where to receive air-quality updates and where any designated filtered work area is located.
Follow the current work plan and respiratory-protection instructions. Ask for a demonstration if you are unsure how to use the equipment provided.
Use correctly fitted hearing protection for the whole noisy task, alongside efforts to reduce noise.
NIOSH recommends limiting occupational noise to 85 dBA averaged over eight hours; that recommendation is distinct from California’s legal requirements. Noise reduction, well-selected protection, consistent use, and appropriate hearing checks work together.
Employer Actions
Identify the loudest tasks and arrange a noise assessment if exposure levels are unknown. Review feasible ways to make those tasks quieter.
Have your safety team check protector selection and individual fit. Confirm which employees need audiograms and the next dates due.
Employee Actions
Follow the manufacturer’s fitting instructions before entering the noisy area; get a fitting demonstration if needed.
Keep protection in place during noisy work and attend scheduled hearing checks. Ask your safety team to replace worn or damaged protection.
Adjust the screen, support your feet, and bring the keyboard and mouse within easy reach.
OSHA’s workstation guidance favors a supported, neutral posture with variation in activity. These practical setup checks are useful during onboarding, after an equipment change, and whenever a workstation is shared.
Employer Actions
Use the OSHA workstation checklist on one workstation today. Check screen position, chair support, and keyboard/mouse reach before buying extra equipment.
Add a brief setup check to onboarding and equipment changes. Organize computer work to allow changes in task and posture.
Employee Actions
Set the top of the screen at or below eye level. Adjust the chair so your back is supported and your feet rest on the floor or a footrest.
Place the keyboard and mouse close enough to keep elbows near your sides and wrists straight. Change position or activity during natural pauses.
General education, not an individual medical assessment or a complete compliance review. Apply current requirements to your workplace and seek medical guidance appropriate to your circumstances.